loading
MD-1803
MD-1803 expands the Zhenhui Dyed Window Film range with a cost-conscious 4% privacy film that emphasizes deep shading, glare control, and rear-cabin appearance rather than high IR performance. It provides a 4% VLT limo shade and 99% UV rejection, while the low single-wavelength IR figures keep the product positioned as a straightforward dyed privacy film. The film uses a non-reflective dyed appearance and is intended for professional wet installation on automotive glass. Buyers can use the measured VLT, UV, two IR wavelength values, and TSER to position it accurately within a multi-level product line. It is suitable for wholesale, OEM, ODM, and private-label programs, with final application always subject to local tint laws and the optical properties of the original glass.
Shade and Visibility Control: At 4% VLT, the film creates a very dark privacy effect. It is mainly intended for rear side glass and back windows, and installers must confirm local laws before use.
Measured Solar Performance: The supplied TSER value is 61%. Single-wavelength IR values are 8% at 1400 nm and 11% at 950 nm. This model is not designed as a high-IR film; its stronger sales points are shade, appearance, visibility, or UV performance depending on the application. Actual installed performance can vary with glass type, test equipment, film batch, and measurement method.
UV Performance with Honest Positioning: The supplied test value shows 99% UV rejection, which gives dealers a strong, easy-to-understand protection message for skin, upholstery, dashboards, and other interior surfaces.
Installer-Friendly Film Structure: The 1.8mil dyed construction is easy to handle for experienced automotive installers. It supports smooth cutting, wet application, and common heat-forming methods used on curved rear glass.
Wholesale and Private-Label Value: The product is suitable for distributors building a complete dyed window film range. It can be combined with neighboring VLT models to create good-better-best packages and clearer upselling choices for tint shops.
Model NO. | MD-1803 |
|---|---|
Type | Dyed Window Film |
Material | PET |
After-sales Service | Video Teaching etc. |
Color | Black |
MOQ | 1 Roll |
Thickness | 1.8mil |
Vlt | 4% |
UV | 99% |
IR (1400nm) | 8% |
IR (950nm) | 11% |
Tser | 61% |
Application | Car Windows |
Sample | Accept |
Logo | Customized Logo Acceptable |
OEM ODM Custom | Accept |
Transport Package | Standard Packaging or Customized |
Specification | 1.52m*30m(can be customized) |
Trademark | customizable |
Origin | Shandong, China |
Rear passenger windows for customers who want strong privacy at an accessible price point. Confirm legal VLT limits and glass compatibility before installation.
Commercial vans, cargo vehicles, and utility fleets that benefit from a dark rear-cabin appearance. Confirm legal VLT limits and glass compatibility before installation.
Starter product ranges for tint shops that need a basic 4% dyed film beside premium IR products. Confirm legal VLT limits and glass compatibility before installation.
Q: Where should this dark shade normally be installed?
A: A 4% VLT film is normally used on rear side windows and rear glass. It may be restricted or prohibited on front windows in many markets, so installers should check local regulations before installation.
Q: What is the recommended storage method?
A: Store unopened rolls upright in a clean, dry area away from direct sunlight, high heat, and heavy pressure. Keep the original packaging closed until use and rotate stock by batch to maintain consistent color and adhesive performance
Q: Can this film be installed on curved rear glass?
A: Yes, trained installers can heat-shrink the film for curved automotive glass. Use controlled heat and smooth movements. Overheating can distort the PET or adhesive, so test the shrinking behavior before working on a full rear window.
Q: Why are there two IR rejection values?
A: IR performance changes by wavelength. The supplied data lists 8% at 1400 nm and 11% at 950 nm. Showing both values is more transparent than using one number without stating the test wavelength.
