loading
| Availability: | |
|---|---|
| Quantity: | |
MN-50
MN-50 provides a light-transmitting choice in the 2 mil HD Soft Film range, with VLT listed at 65%. The MN-50 catalog reference identifies the product but should not be read as its actual transmission value. Its supplied solar entries are 48% UV, 28% IR at 1400 nm, 26% IR at 950 nm, and 31% TSER. This profile suits consideration when buyers prefer a light tint and a clearly specified product over a deep privacy shade. Compare MN-50 with an approved sample on the target glass to confirm appearance and optical quality, and assess suitability for each intended vehicle window position.
Light tint with a 65 percent VLT entry:The listed 65% VLT gives MN-50 a light visual position within the N-series selection. Customers can compare it with darker options while keeping the cabin appearance relatively open. Because the source does not give an exact color or reflectance level, a mounted glass sample remains the best way to approve the intended visual result.
Similar infrared readings at two stated wavelengths:MN-50 lists 28% IR at 1400 nm and 26% at 950 nm. These relatively close point readings give buyers two specific reference values for technical comparison. They should still remain labeled by wavelength, since agreement between two measurements does not establish uniform performance throughout the infrared range or a quantified reduction in total vehicle heat.
A defined basic solar profile: A UV entry of 48% and TSER of 31% help identify the intended specification without overstating performance. This light transmission automotive soft film can be compared with MN-60 and MN-65 using the same fields. Buyers seeking stronger UV filtering should choose by the documented UV figure rather than assume that every HD film shares the same performance.
Consistent identification within the 2 mil group:The source lists MN-50 at 2 mil and associates it with catalog code MN-50. Stating those identifiers alongside the actual 65% VLT supports accurate sample approval and ordering. This is particularly useful for a product whose catalog suffix could otherwise be mistaken for a 50% VLT shade or confused with another film in the range.
Model NO. | MN-50 |
|---|---|
Type | Soft Window Film |
Material | PET |
After-sales Service | Video Teaching etc. |
Color | Blue |
MOQ | 1 Roll |
Thickness | 2mil |
Vlt | 65% |
UV | 48% |
IR (1400nm) | 28% |
IR (950nm) | 26% |
Tser | 31% |
Application | Car Windows |
Sample | Accept |
Logo | Customized Logo Acceptable |
OEM ODM Custom | Accept |
Transport Package | Standard Packaging or Customized |
Specification | 1.52m*30m(can be customized) |
Trademark | customizable |
Origin | Shandong, China |
MN-50 may be considered where a customer requests light automotive tint and accepts its listed solar specification. Its 65% VLT offers a starting point for evaluating the shade. Check the final appearance on the vehicle glass, then confirm optical quality, outward visibility, and the applicable requirements before deciding which window positions are appropriate.
Use MN-50 in side-by-side evaluations of lighter 2 mil HD soft films. Keep the 48% UV and 31% TSER entries visible so buyers can judge the complete profile. Showing it with MN-60 and MN-65 helps explain why similar visible-light transmission does not necessarily mean identical UV or infrared performance in an automotive film selection.
Q: Is MN-50 a 50 percent VLT product?
A:The actual VLT listed for MN-50 is 65%. MN-50 is the catalog reference, so the name should not be used to infer a 50% transmission value. Confirm the selected model against the approved specification and measure the installed assembly if a particular finished-glass VLT is required for the application.
Q: Is the listed UV performance the same as MN-65?
A: No. MN-50 has a 48% UV entry, while MN-65 is listed at 85%. Their similar light-shade positioning does not make their UV specifications interchangeable. Compare the actual data and supporting test basis, particularly when UV filtering is one of the acceptance criteria for your customer or order.
Q: Can the two IR readings be advertised as a full-spectrum rating?
A: No. The 28% and 26% entries apply to 1400 nm and 950 nm respectively. Two point measurements do not establish a full-spectrum infrared rating. Present them separately and use the 31% TSER entry on its stated test basis when discussing the supplied total solar specification of MN-50.
