loading
| Availability: | |
|---|---|
| Quantity: | |
MS-10
MS-10 is a deep-shade 2 mil carbon soft car film with 10% listed visible light transmission. It provides a defined dark tint option for compatible automotive glazing where the shade is permitted and appropriate. The supplier table records 54% IR at 1400 nm, 63% IR at 950 nm, and 77% TSER. UV is listed as 100%, a supplier figure requiring its wavelength range, measurement method, and rounding context rather than an absolute protection claim. Assess MS-10 on the intended vehicle glass to confirm the actual color, optical finish, and low-light outward view before approving the application or using the solar entries for a formal performance requirement.
A deep carbon finish at 10 percent VLT:MS-10's listed 10% VLT gives customers a deep tint specification in a carbon automotive film format. It can be considered for suitable glazing when a pronounced dark appearance is requested. Check a mounted sample under the vehicle's expected lighting conditions before choosing the window positions, because original glass and low ambient light influence the available outward view through the finished assembly.
Two specific infrared entries for evaluation:The supplied infrared values for MS-10 are 54% at 1400 nm and 63% at 950 nm. They provide two defined measurements for a technical discussion about the product. State the wavelengths whenever using the figures, and confirm the test basis for a formal requirement; the higher reading is not a general percentage of all heat rejected by a vehicle.
A reported total solar entry of 77 percent: The supplier lists MS-10 at 77% TSER, providing a separate total solar value alongside the 10% VLT shade and the two infrared entries. Review the applicable glass and measurement method before relying on it for a substantiated performance claim. The percentage should not become a promise of vehicle-temperature reduction, cooling-load savings, or identical results under every driving condition.
A 2 mil carbon format for professional selection:MS-10's 2 mil thickness gives an installer a defined carbon film format to assess on compatible automotive glazing. Use that specification with the actual 10% VLT when approving the physical finish and application scope. Confirm handling and the installed optical appearance on a sample; carbon classification and thickness alone do not establish a quantified durability warranty or safety-glazing rating.
Model NO. | MS-10 |
|---|---|
Type | Soft Window Film |
Material | PET |
After-sales Service | Video Teaching etc. |
Color | Black |
MOQ | 1 Roll |
Thickness | 2mil |
Vlt | 10% |
UV | 100% |
IR (1400nm) | 54% |
IR (950nm) | 63% |
Tser | 77% |
Application | Car Windows |
Sample | Accept |
Logo | Customized Logo Acceptable |
OEM ODM Custom | Accept |
Transport Package | Standard Packaging or Customized |
Specification | 1.52m*30m(can be customized) |
Trademark | customizable |
Origin | Shandong, China |
MS-10 can be assessed for compatible rear passenger, quarter, or rear glass where its deep shade is permitted and practical. The 10% listed VLT requires an evaluation of low-light outward visibility. Approve a sample on matching vehicle glass, and discuss the intended use with the installer before choosing the extent of the shaded glazing.
MS-10 may be evaluated for compatible rear passenger windows when a customer requests a deep carbon finish and the intended use permits the completed shade. Its 10% listed VLT requires a practical visibility assessment on matching glass. Check the sample during daylight and lower-light conditions before agreeing the window areas, with the reported solar figures reviewed separately.
Q: How should the deep shade of MS-10 be assessed?
A:Use its listed 10% VLT as the starting specification and inspect a mounted sample on matching vehicle glass. The completed appearance and available outward view depend on the original glazing and lighting. Confirm that the selected shade suits the intended window position and vehicle use before approving the film for installation.
Q: Can the 100 percent UV entry be used without qualification?
A: It should be identified as the supplier's listed value, with the applicable UV range, method, and rounding basis confirmed for a formal claim. It does not establish complete protection at every wavelength. Avoid wording that promises zero UV transmission under all conditions or protection against every cause of interior fading.
Q: Does the darker shade explain the whole solar specification?
A:No. MS-10's 10% VLT, two IR readings, UV entry, and 77% TSER describe different properties. A dark appearance does not allow the other figures to be calculated. Compare the documented measurements on an equivalent test basis and inspect a sample when both shade and solar performance are important to the purchase.
