loading
| Availability: | |
|---|---|
| Quantity: | |
MP-10
MP-10 combines a deep 10% listed VLT with a distinctive pair of infrared readings in the standard Soft Film range. The supplier table records 84% at 950 nm but only 8% at 1400 nm, so both values matter when describing this product. Its other entries are 96% UV, 57% TSER, and a thickness of 1.8 mil. Identified in the catalog as MP-10, MP-10 is an option to evaluate for dark-shade applications on compatible automotive glass. Select it with an installed sample and a review of visibility and destination requirements, rather than relying on the darker appearance or the higher IR reading alone.
Deep tint defined by 10 percent VLT: MP-10's listed 10% VLT gives buyers a clearly dark option within the standard range. The shade can create a stronger visual change than MP-15 at 18% VLT. It is appropriate to assess where dark glazing is permitted, with particular attention to the amount of light available for outward visibility after the film is applied.
A distinctive wavelength response:The supplied IR figures are 84% at 950 nm and 8% at 1400 nm. Preserving that difference allows an accurate product comparison and avoids masking the lower reading. A customer requiring performance at a particular wavelength can review the relevant entry, while buyers seeking broad infrared control should request a complete spectral report for the intended assembly.
A listed UV value of 96 percent: The 96% UV entry gives MP-10 a higher reported UV figure than MP-15 in the same standard group. It can be part of a purchasing comparison alongside shade and total solar data. The value should retain its supplier-reported status and should not be extended into complete interior-fading prevention or an unsupported health claim.
Identifiable dark shade specification:MP-10 is listed at 1.8 mil with a 57% TSER value and MP-10 catalog reference. Those details make it easier to specify the intended dark automotive soft film for sampling and ordering. Keep the exact model and the two IR wavelengths on the product record so a later purchase does not rely on shade alone.
Model NO. | MP-10 |
|---|---|
Type | Soft Window Film |
Material | PET |
After-sales Service | Video Teaching etc. |
Color | Black |
MOQ | 1 Roll |
Thickness | 1.8mil |
Vlt | 10% |
UV | 96% |
IR (1400nm) | 8% |
IR (950nm) | 84% |
Tser | 57% |
Application | Car Windows |
Sample | Accept |
Logo | Customized Logo Acceptable |
OEM ODM Custom | Accept |
Transport Package | Standard Packaging or Customized |
Specification | 1.52m*30m(can be customized) |
Trademark | customizable |
Origin | Shandong, China |
Consider MP-10 for compatible rear vehicle glazing where a 10% listed VLT is acceptable for the intended use and destination. An installer should assess the completed assembly in daylight and low light. The dark appearance can support a shaded rear-compartment look, but it does not establish guaranteed privacy or acceptable visibility in every vehicle.
MP-10 is useful in a comparative sample set because its 950 nm and 1400 nm readings differ substantially. Test samples using clearly identified instruments and wavelengths, and compare the results with the supplied table. This helps distributors explain why a single infrared-meter demonstration cannot describe the whole solar-performance profile of a dark tint.
Q: Is the 84 percent IR figure valid at both wavelengths?
A:No. The supplied table lists 84% at 950 nm and 8% at 1400 nm. They must be shown separately. If the difference is important to your specification, ask for the supplier's supporting measurements rather than averaging the two figures or changing either value to make them appear consistent.
Q: Can I describe MP-10 as rejecting 84 percent of all heat?
A: No. The 84% entry relates to 950 nm only. The separate TSER entry is 57%, and neither figure is a direct percentage reduction in vehicle temperature. Use the complete specification when discussing solar performance and confirm the test basis before comparing it with another film or a different instrument reading.
Q: Is a 10 percent tint suitable for all rear windows?
A: Suitability depends on the destination rules, glass type, vehicle configuration, and required outward visibility. The listed 10% VLT does not by itself approve an installation. Check the finished glazing and consider reversing and night driving before selecting MP-10 for a particular window position or vehicle fleet.
