loading
| Availability: | |
|---|---|
| Quantity: | |
MP-35
MP-35 brings a medium shade to the standard Soft Film selection with a listed VLT of 35%. It offers a more noticeable tint than the light PK models while avoiding the very dark appearance of the lowest-transmission options. The supplied table identifies a 1.8 mil thickness, 74% UV, and 43% TSER. Its infrared readings remain low at 4% for 1400 nm and 12% for 950 nm, so the product should be described around its shade and documented overall figures. Also identified as MP-35, MP-35 can be evaluated for suitable automotive glazing after sample approval and finished-glass checks.
A defined medium shade: The 35% listed VLT provides a clear midpoint for buyers comparing the standard PK range. This medium shade automotive tint offers more visible darkening than the 79% VLT alternatives. It can help reduce the amount of visible light passing through the treated glazing, although a specific glare-reduction percentage is not supplied and should not be inferred.
A documented UV entry for comparison:MP-35 carries a listed UV value of 74%, allowing buyers to distinguish it from both lower-UV light films and higher-UV dark models. This figure is useful when matching a product to a customer's specification. It does not support claims of complete ultraviolet blocking, medical protection, or prevention of all interior fading over time.
Solar information beyond a single infrared number: The table lists 43% TSER alongside IR readings of 4% at 1400 nm and 12% at 950 nm. Keeping these metrics separate gives buyers a more accurate description of MP-35. The TSER entry should be considered on its documented test basis, and the point-specific infrared values should not be promoted as broad-spectrum thermal rejection.
Straightforward specification for shade comparisons:With a 1.8 mil thickness and MP-35 catalog reference, MP-35 is easy to identify in a sample range that includes lighter and darker PK films. Buyers can compare its 35% VLT directly with MP-15 at 18%. Approval should still include a visual check, since equal thickness does not establish identical color, finish, or installation behavior.
Model NO. | MP-35 |
|---|---|
Type | Soft Window Film |
Material | PET |
After-sales Service | Video Teaching etc. |
Color | Grey |
MOQ | 1 Roll |
Thickness | 1.8mil |
Vlt | 35% |
UV | 74% |
IR (1400nm) | 4% |
IR (950nm) | 12% |
Tser | 43% |
Application | Car Windows |
Sample | Accept |
Logo | Customized Logo Acceptable |
OEM ODM Custom | Accept |
Transport Package | Standard Packaging or Customized |
Specification | 1.52m*30m(can be customized) |
Trademark | customizable |
Origin | Shandong, China |
MP-35 can be assessed for passenger-car glazing when the customer requests a medium tint rather than a very light or very dark finish. Decide the appropriate glass positions after checking the destination requirements. A sample installed on the actual glass helps the customer judge appearance, outward visibility, and whether the shade suits the vehicle.
Use MP-35 as a 35% VLT reference in a physical shade display for automotive film customers. Show its full MP-35 specification beside the sample to prevent assumptions based on darkness alone. This is particularly useful when explaining why the 74% UV entry and 43% TSER figure describe different aspects of performance.
Q: Does 35 percent VLT mean 65 percent heat rejection?
A: No. VLT describes visible-light transmission, while the table separately lists MP-35 at 43% TSER. Subtracting VLT from 100 does not calculate heat rejection. The IR readings of 4% at 1400 nm and 12% at 950 nm are additional, wavelength-specific values and should also remain separate.
Q: Is MP-35 a high infrared rejection film?
A: The supplied IR entries are 4% at 1400 nm and 12% at 950 nm. They do not support a high infrared rejection claim. Choose MP-35 for its medium shade and listed specification, and review other products if a particular infrared performance requirement must be met for the order.
Q: Will this shade provide privacy at night?
A: A 35% VLT tint can change visibility through the glass, but privacy depends on the lighting inside and outside the vehicle. Illuminated interiors may remain visible at night. Evaluate an installed sample under expected conditions and avoid treating a medium automotive tint as an assurance of privacy in every setting.
