loading
| Availability: | |
|---|---|
| Quantity: | |
MP-95
MP-95 is a light-transmitting option in the standard Soft Film range for buyers who want a subtle change to automotive glazing. Its listed 79% visible light transmission keeps the specification focused on a light appearance rather than deep privacy. The 1.8 mil film carries supplier figures of 26% UV, 5% IR at 1400 nm, 10% IR at 950 nm, and 15% TSER. These modest solar figures make shade selection and visual assessment the main purchasing considerations. Available under catalog code MP-95, MP-95 should be sampled on the intended glass before a vehicle-wide order or installation is approved.
Light appearance with 79 percent VLT: The listed 79% VLT places MP-95 among the lighter options in this collection. It gives installers a starting point when customers prefer an open cabin appearance over darkened windows. Evaluate the sample against the vehicle's existing glass, since the finished appearance and transmitted light depend on both the original glazing and the applied film.
Clearly defined basic solar specification:A supplier-listed TSER of 15% supports a restrained description of solar performance. This soft automotive window film is best presented around its light shade and basic specification, without promising major cabin cooling. Buyers can compare the stated value with other models while checking that any test reports use equivalent glass and measurement conditions.
Separate infrared readings for informed selection: MP-95 lists 5% IR at 1400 nm and 10% at 950 nm. Showing both figures helps buyers understand that its response varies with wavelength. These low readings also keep expectations realistic for customers choosing a light shade car window film. Neither figure represents rejection across the full infrared spectrum or a percentage reduction in vehicle temperature.
Identifiable 1.8 mil product specification:The 1.8 mil thickness and MP-95 catalog reference give distributors concrete details for sample approval and repeat ordering. The listed UV value is 26%, so this model should be selected for its intended visual role rather than advertised as a high-UV-protection film. Record the exact system model when approving samples to reduce substitution between similar light shades.
Model NO. | MP-95 |
|---|---|
Type | Soft Window Film |
Material | PET |
After-sales Service | Video Teaching etc. |
Color | Grey |
MOQ | 1 Roll |
Thickness | 1.8mil |
Vlt | 79% |
UV | 26% |
IR (1400nm) | 5% |
IR (950nm) | 10% |
Tser | 15% |
Application | Car Windows |
Sample | Accept |
Logo | Customized Logo Acceptable |
OEM ODM Custom | Accept |
Transport Package | Standard Packaging or Customized |
Specification | 1.52m*30m(can be customized) |
Trademark | customizable |
Origin | Shandong, China |
Consider MP-95 for compatible automotive windows where a light visual finish is preferred and the finished glazing meets the destination's requirements. Its 79% listed VLT makes it a candidate for customers who dislike dark tint. Compare an installed sample in daylight and at night before deciding which vehicle windows should receive the film.
MP-95 can occupy the light end of a Soft Film sample display. Pair the physical sample with its MP-95 reference and full specification so buyers can compare it against darker products. Demonstrations should emphasize appearance and actual readings, particularly because the 15% listed TSER and 26% UV figure do not support premium solar-control claims.
Q: Does the MP-95 code mean 95 percent VLT??
A: No. MP-95 is the catalog identifier, while the supplied table lists MP-95 at 79% VLT. Use the measured or documented specification when choosing a shade. A code is not a substitute for testing the final glass-and-film assembly, particularly when the selected window position is subject to a light-transmission requirement.
Q: Is MP-95 intended for strong heat rejection?
A: Its listed TSER is 15%, with IR values of 5% at 1400 nm and 10% at 950 nm. Those figures support modest expectations. Select this model primarily for a light appearance, and compare higher-performing specifications if solar control is the main purchasing requirement for the vehicle.
Q: Can I use MP-95 on a windshield?
A: The 79% listed VLT does not establish windshield suitability or approval. The installer must confirm film and glass compatibility, optical quality, and applicable requirements for that vehicle and window position. Evaluate the completed glazing rather than relying on the film's listed value or on the MP-95 product code alone.
